Iogear GWRH1 Bedienungsanleitung

NetShair Link Portable Wi-Fi Router & USB Media HubQuick Start GuideGWRH1PART NO. Q1238-awww.iogear.com

9Viewing USB device (Android Devices)4. Tap Photo, Music or Movie button to see media content select a file to playback. To view other file type such

10Internet Connection (Android Devices)Option 1: DHCP or PPPoEEthernet connection: Connect an Ethernet cable from the modem to the WAN port of the Net

IOGEARMeeting RoomOfficeWarehouseShop11Option 2: Hotspot or RepeaterTo connect the NetShair Link to a wireless internet connection, choose Hotspot (cr

Option 1: Wireless PasswordTo change the pre-shared network key, enter a new key with minimum 8 characters. Tap Setup > Wireless > Fill in new

NetShair Link Setup (Laptop / Computer)1. Turn on the NetShair Link by sliding the switch to “AP ON”.2. Click on the wireless icon on the bottom right

14Internet Connection File ServerWireless WAN System SettingWizard3. On the setup Wizard screen click next.4. Choose Gateway, Hotspot or Repeater mode

15GatewayIn Hotel/Office/Home (DSL/Cable Modem) applications using Ethernet connection to access the Internet, select Gateway. Choose either DHCP Clie

16Wireless SecurityEnter the pre-shared netwrok key then click Finished.Hotspot/RepeaterTo connect the NetShair Link to a wireless internet connection

For Charging Only DC 5V 1A~2.1AHDD173. Click File Server icon to browse the USB contents.4. Select a folder to open then click on the file you want to

FCC StatementThis product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Thes

For Charging Only DC 5V 1A~2.1A1Package Contents1 x NetShair Link module1 x U.S. power plug1 x Quick Start GuideSystem Requirements- Wired Ethernet co

WE’RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP THIS PRODUCT?Make sure you:1. Visit www.iogear.com for more product information 2. Visit www.iogea

orHDDRJ45ConnectorUSB DeviceFor Charging Only DC 5V 1A~2.1AFor Charging Only DC 5V 1A~2.1AHardware Installation 1. Plug the NetShair Link into a powe

NetShair Link Setup (iPod / iPhone / iPad)3. Turn on the NetShair Link by sliding the switch to “AP ON”.4. Open the Settings menu on your mobile devi

For Charging Only DC 5V 1A~2.1AHDD1. Connect your USB Flash Drive or USB Hard Drive to the upper USB port.2. Make sure the “NetShair Link” Wi-Fi netwo

5Internet Connection (iPod / iPhone / iPad)Option 1: DHCP or PPPoEEthernet connection: Connect an Ethernet cable from the modem to the WAN port of the

6Option 2: Hotspot or RepeaterTo connect the NetShair Link to a wireless internet connection, choose Hotspot (creates a new password protected hotspot

Option 1: Wireless PasswordTo change the pre-shared network key, enter a new key with minimum 8 characters. Tap Setup > Wireless > Fill in new

3. Turn on the NetShair Link by sliding the switch to “AP ON”.4. Open the Settings menu on your mobile device and set Wi-Fi to ON.5. Choose "NetS